1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Missing Lower Front Bumper Clips

Discussion in '2.5 Gen Tundras (2014-2021)' started by NCSkeeter, Sep 7, 2019.

  1. Sep 7, 2019 at 5:22 PM
    #1
    NCSkeeter

    NCSkeeter [OP] New Member

    Joined:
    Dec 28, 2018
    Member:
    #23611
    Messages:
    227
    Gender:
    Male
    Vehicle:
    2019 Silver Tundra Crewmax 4x4 1794
    TRD Rear Sway Bar, Truxedo X15 Tonneau Cover, Toyota OEM Bed Mat
    The bumpers on my 2019 were really crooked from the factory so I asked the dealer to straighten them under warranty at my 6 month service. They did and they look much better now. There was greater than 1/4" difference in gap bt left and right. Front still isn't perfect, but its a lot better.

    While crawling around the truck to see if they caused any collateral damage, I notice it appears that some screws and clips are missing at the very bottom of the front bumper. There's a screw through a tab into the skid plate in the center. On each side there's a tab that looks like it should have a screw into the skid plate, but nothing's there.

    Below image is from a website I found for an aftermarket skid plate install. It indicates there's three screws.

    [​IMG]

    Image pulled from:

    https://www.addictivedesertdesigns.com/news/2014-2018-toyota-tundra-front-bumper-removal
     
    Last edited: Sep 7, 2019
  2. Sep 7, 2019 at 5:44 PM
    #2
    pickeledpigsfeet

    pickeledpigsfeet New Member

    Joined:
    Aug 10, 2018
    Member:
    #17999
    Messages:
    495
    Gender:
    Male
    Sierra Foothills, Ca
    Vehicle:
    2019 Tundra/14 FJ/ 90 SASed xcab
    Kings & Icons
    My 2019 has screws as pictured.

    Edit- it dose have clips on the skids that they screw into. Here is a pic. I had installed a rci skid a while ago and it mounts differently so I was thinking of it when I thought it screwed into the crossmember

    3095C807-329F-4C69-8047-A84CA3EE422D.jpg
     
    NCSkeeter[OP] likes this.
  3. Sep 7, 2019 at 5:50 PM
    #3
    NCSkeeter

    NCSkeeter [OP] New Member

    Joined:
    Dec 28, 2018
    Member:
    #23611
    Messages:
    227
    Gender:
    Male
    Vehicle:
    2019 Silver Tundra Crewmax 4x4 1794
    TRD Rear Sway Bar, Truxedo X15 Tonneau Cover, Toyota OEM Bed Mat
    i have no screws nor clips on the outer holes. I guess it’s back to the dealer Monday.

    2D79B691-941C-4EFD-A4FA-F653115E336C.jpg
     
  4. Sep 7, 2019 at 5:53 PM
    #4
    pickeledpigsfeet

    pickeledpigsfeet New Member

    Joined:
    Aug 10, 2018
    Member:
    #17999
    Messages:
    495
    Gender:
    Male
    Sierra Foothills, Ca
    Vehicle:
    2019 Tundra/14 FJ/ 90 SASed xcab
    Kings & Icons
    Wonder how they lost those plastic clip in nuts? The are in there really good. I could see forgetting to put the screws back in. They must have had to remove them when trying to fit the bumper cover. They clip in and cant fall out.
     
    NCSkeeter[OP] and Black Wolf like this.
  5. Sep 7, 2019 at 5:54 PM
    #5
    pickeledpigsfeet

    pickeledpigsfeet New Member

    Joined:
    Aug 10, 2018
    Member:
    #17999
    Messages:
    495
    Gender:
    Male
    Sierra Foothills, Ca
    Vehicle:
    2019 Tundra/14 FJ/ 90 SASed xcab
    Kings & Icons
    Here is a pic

    EBCD04D8-2991-48C5-BDD4-B590E6F78D02.jpg
     
    NCSkeeter[OP] likes this.
  6. Sep 8, 2019 at 2:39 PM
    #6
    thearborbarber

    thearborbarber New Member

    Joined:
    Jul 29, 2019
    Member:
    #33864
    Messages:
    287
    First Name:
    Chris
    SoDak
    Vehicle:
    2018 Tundra SR5
    I wished you would have posted earlier. I just tossed the ones off of mine last week.
     
  7. Sep 8, 2019 at 2:58 PM
    #7
    Jengel451

    Jengel451 Misanthropist

    Joined:
    May 30, 2018
    Member:
    #15739
    Messages:
    800
    The Bitterroot, MT
    Vehicle:
    2017 Barcelona TRD Limited CrewMax
    3/1.5 Toytec/Icon AAL, 17" Rebounds, 317-70-70 ST Maxx's
    Mine disappeared the first dealer oil change. They plastic flapping around makes a racket over bumps and wash boards now
     
    Boerseun likes this.
  8. Sep 8, 2019 at 3:52 PM
    #8
    Hbjeff

    Hbjeff New Member

    Joined:
    Jan 20, 2019
    Member:
    #24845
    Messages:
    4,897
    Gender:
    Male
    Huntington Beach
    Vehicle:
    2010 DC 5.7 2wd
    Trd sways, bullydog, magnaflow, sumo springs
    The rattle that causes took me months to find...

    You can order them online for almost nothing. They have broken on me a few times, and i now just zip tie the outer ones
     
    NCSkeeter[OP] likes this.
  9. Sep 8, 2019 at 5:32 PM
    #9
    NCSkeeter

    NCSkeeter [OP] New Member

    Joined:
    Dec 28, 2018
    Member:
    #23611
    Messages:
    227
    Gender:
    Male
    Vehicle:
    2019 Silver Tundra Crewmax 4x4 1794
    TRD Rear Sway Bar, Truxedo X15 Tonneau Cover, Toyota OEM Bed Mat
    Been planning on using my two free oil changes, but this may change my mind....

    If they didn’t put this back in right, how am I supposed to be confident that all the clips and screws I can’t see are in right....

    No one but me ever touched my old taco and I liked it that way.
     
    NewImprovedRon likes this.
  10. Sep 8, 2019 at 5:38 PM
    #10
    15whtrd

    15whtrd Mr. Blonde

    Joined:
    Sep 20, 2015
    Member:
    #1829
    Messages:
    9,387
    Gender:
    Male
    First Name:
    Sean
    SoCal
    Vehicle:
    White 2015 Tundra DC SR5 TRD 4x4 5.7L, White 2003 Sequoia 2WD
    TRD Pro suspension, +2 Coachbuilder shackles, 2015 TRD Pro headlights, 20% ceramic tinted windows, clear ceramic tinted front windshield, aFe drop in pro s dry air filter, TRD airflow accelerator, TRD oil fill cap, TRD 18 psi radiator cap, BDX Bullydog tuner, Weathertech floor mats front and rear, rear seat fold down mod, DNA hard trifold tonneau cover, Linex with uv protection, TRD rear swaybar, TRD center caps, TRD Pro grille insert with color matching surround and bulge, TRD PRO headlights, aluminum oil filter canister, Real truck tailgate seal, Pop-n-lock tailgate lock actuator, rear diff breather relocate, RCI front skid plate. 275/70 R18 BFG KO2s
    Before I got my RCI skid I dealt with those little clips often. One was stripped the first time I took the skid plate down to change the oil. I got the dealer to give me a couple. Then I bought some extras. They are really cheap. I suggest just keeping a few in the toolbox. A coarse metal screw into a plastic fitting. Recipe for a stripping LOL
     
    NewImprovedRon likes this.
  11. Sep 8, 2019 at 5:40 PM
    #11
    15whtrd

    15whtrd Mr. Blonde

    Joined:
    Sep 20, 2015
    Member:
    #1829
    Messages:
    9,387
    Gender:
    Male
    First Name:
    Sean
    SoCal
    Vehicle:
    White 2015 Tundra DC SR5 TRD 4x4 5.7L, White 2003 Sequoia 2WD
    TRD Pro suspension, +2 Coachbuilder shackles, 2015 TRD Pro headlights, 20% ceramic tinted windows, clear ceramic tinted front windshield, aFe drop in pro s dry air filter, TRD airflow accelerator, TRD oil fill cap, TRD 18 psi radiator cap, BDX Bullydog tuner, Weathertech floor mats front and rear, rear seat fold down mod, DNA hard trifold tonneau cover, Linex with uv protection, TRD rear swaybar, TRD center caps, TRD Pro grille insert with color matching surround and bulge, TRD PRO headlights, aluminum oil filter canister, Real truck tailgate seal, Pop-n-lock tailgate lock actuator, rear diff breather relocate, RCI front skid plate. 275/70 R18 BFG KO2s
    I have one left besides the ones in my old skid plate. Here’s the package and part numberCC631519-091F-426A-9BE1-A58B5B189F68.jpg
     
    Hbjeff, TWJLee and NewImprovedRon like this.
  12. Sep 8, 2019 at 5:41 PM
    #12
    NCSkeeter

    NCSkeeter [OP] New Member

    Joined:
    Dec 28, 2018
    Member:
    #23611
    Messages:
    227
    Gender:
    Male
    Vehicle:
    2019 Silver Tundra Crewmax 4x4 1794
    TRD Rear Sway Bar, Truxedo X15 Tonneau Cover, Toyota OEM Bed Mat
    Thanks! Unfortunately I need the screw too....
     
    15whtrd[QUOTED] likes this.
  13. Sep 8, 2019 at 5:42 PM
    #13
    15whtrd

    15whtrd Mr. Blonde

    Joined:
    Sep 20, 2015
    Member:
    #1829
    Messages:
    9,387
    Gender:
    Male
    First Name:
    Sean
    SoCal
    Vehicle:
    White 2015 Tundra DC SR5 TRD 4x4 5.7L, White 2003 Sequoia 2WD
    TRD Pro suspension, +2 Coachbuilder shackles, 2015 TRD Pro headlights, 20% ceramic tinted windows, clear ceramic tinted front windshield, aFe drop in pro s dry air filter, TRD airflow accelerator, TRD oil fill cap, TRD 18 psi radiator cap, BDX Bullydog tuner, Weathertech floor mats front and rear, rear seat fold down mod, DNA hard trifold tonneau cover, Linex with uv protection, TRD rear swaybar, TRD center caps, TRD Pro grille insert with color matching surround and bulge, TRD PRO headlights, aluminum oil filter canister, Real truck tailgate seal, Pop-n-lock tailgate lock actuator, rear diff breather relocate, RCI front skid plate. 275/70 R18 BFG KO2s
    As I’m sure you’d like to make the dealer fix it all up for you, see if you can just get them to give you the screws and some extra inserts. I’m sure you can do a better job. They get the guy that sweeps the floors to do that stuff
     
  14. Sep 8, 2019 at 5:49 PM
    #14
    Moon Puppy

    Moon Puppy I'm not new!

    Joined:
    Sep 5, 2018
    Member:
    #19065
    Messages:
    3,229
    Gender:
    Male
    First Name:
    Bob
    South Carolina
    Vehicle:
    2020 Tundra Limited
    Oh GOD No, another thing to go check under the truck!!! :annoyed:
     
  15. Sep 9, 2019 at 9:43 AM
    #15
    TWJLee

    TWJLee No Thanks

    Joined:
    Mar 2, 2019
    Member:
    #26906
    Messages:
    170
    Gender:
    Male
    First Name:
    J
    Midwest
    Vehicle:
    2020 Limited DC TRad OR 2020 F150 5.0 single cb 2001 Tacoma 4x4 2.7 5spd AC cab
    GFC Borla XS Ceramic Tint 2” lift on Fox 2.0 -aal- Methods on 33
    I just left off my skid plate (for the time being, since I dont off road regularly)
    But yes these plastic inserts break regularly so ask for a few extra when at dealer. I change my own oil. Not worth the time to go get the “free” oil changes
     
  16. Sep 9, 2019 at 3:40 PM
    #16
    Bergmen

    Bergmen New Member

    Joined:
    Jan 24, 2018
    Member:
    #12418
    Messages:
    996
    Gender:
    Male
    Ukiah, California
    Vehicle:
    2018 Blazing Blue Pearl DC 4X2 SR5
    They break, strip and fall out pretty easily, especially after several R&Rs. All have happened to one or more of mine (and I don't gorilla them when I tighten). Not a good fastener choice for repetitive use.

    Dan
     
    15whtrd likes this.
  17. Sep 9, 2019 at 4:22 PM
    #17
    matictundra

    matictundra New Member

    Joined:
    Jul 20, 2017
    Member:
    #8654
    Messages:
    676
    Gender:
    Male
    First Name:
    Franco
    AZ
    Vehicle:
    2017 Red Tundra SR5 4x4 CM
    3"/1.5" Lift (Fox 2.5 DSC all around, JBA UCA's and Toytec Shackles at 1.5") Front and Rear TRD Sway Bars Nitto Ridge Grappler 37x12.5R18 w/ Brz 18x9 +25mm Methods MR701 Wheels AFE Dry Filter with TRD Flow Acc Dirty Deed No Muffler Exhaust Nitro 5.29 Gears RCI Engine, Trany/Trans-Case and Fuel Skid Plates Relocated Rear Diff Breather | Rear Brake Line Extension Jomax ABS Sensor Armor Colored Matched Front Bulge and TRD Pro Grill Assy Modded ADD Stealth Fighter Front Bumper Custom High Clearance Rear Bumper with Modded Tow Receiver Behind Plate and Chopped Rear Fender Custom Bed Stiffeners 2019 TRD PRO LED Headlights w/ Ihacker Harness | BD 40" ARC AMB/WHT DC OnX6 BD 10" Onx6 in the Grill (2X) Rago Low-Profile Ditch and Extended Brkt with Daul BD Squadron Pros - AMB & WHT AMB LED Chase Light (Cargo) | Dual BD Squadron Sports in Rear Bumper Prinsu Roof Rack with a Pair of BD S1 For the Sides and Rear Mictunning C2 Rock Lights, 2 per wheel, and Toyota style switch 2X 55" Quick Light Whips with Toyota style switch Switch Pros SP-9100 with Custom Switch Mount, Custom Engine and Roof Terminal Junction Boxes 12K Lbs Smittybilt Winch with wireless remote and Factor 55 FlatLink E Amp Power Step EVO-One Remote Start Limo Tint (All Around) | De-Badged LED Interior lights with Front / Rear Interior Footwell LED Blue LED Lit Lock/Window Switch Mod AJT Full Chrome Delete Kit w/ 3R3 Painted SHCS Toyota LED Bed Lights Leather Perforated Wrapped Steering Wheel Black TRD Shift Knob ESP Long Box BakFlip MX4 Bed Cover Thinkware Q800Pro Dashcam (Front & Rear) Rago Dashmount w/ Ram Phone Holder
    The issue is if you don't start the thread at the same spot you will be cutting a new one, eventually it will no longer work.
     
    NewImprovedRon likes this.
  18. Sep 9, 2019 at 5:40 PM
    #18
    15whtrd

    15whtrd Mr. Blonde

    Joined:
    Sep 20, 2015
    Member:
    #1829
    Messages:
    9,387
    Gender:
    Male
    First Name:
    Sean
    SoCal
    Vehicle:
    White 2015 Tundra DC SR5 TRD 4x4 5.7L, White 2003 Sequoia 2WD
    TRD Pro suspension, +2 Coachbuilder shackles, 2015 TRD Pro headlights, 20% ceramic tinted windows, clear ceramic tinted front windshield, aFe drop in pro s dry air filter, TRD airflow accelerator, TRD oil fill cap, TRD 18 psi radiator cap, BDX Bullydog tuner, Weathertech floor mats front and rear, rear seat fold down mod, DNA hard trifold tonneau cover, Linex with uv protection, TRD rear swaybar, TRD center caps, TRD Pro grille insert with color matching surround and bulge, TRD PRO headlights, aluminum oil filter canister, Real truck tailgate seal, Pop-n-lock tailgate lock actuator, rear diff breather relocate, RCI front skid plate. 275/70 R18 BFG KO2s
    You just got to get some bolts like this. The skid plate comes with them! Also has an access door for the oil filter. Then I added a fumoto valve for easy mess free oil draining.F515681B-0C94-4292-8605-F52220AA6D31.jpg
     
  19. Sep 9, 2019 at 5:56 PM
    #19
    azTony

    azTony member since sept, 2017 and over 1,600 messages

    Joined:
    Sep 16, 2017
    Member:
    #9693
    Messages:
    2,529
    Gender:
    Male
    First Name:
    Tony
    Sun Lakes, AZ
    Vehicle:
    *** OV Tune Order #4481 *** ECU 0CN21 ***
    2018 Tundra Platinum with Icon Stage 9 w/3.0 and billet UCA, Harrop Elockers, 5.29 on 37’s
    Stealership tosses them because the less hardware the quicker their job. They have done that to all our vehicles and I always have them correct it
     
    NewImprovedRon and Hbjeff like this.
  20. Sep 10, 2019 at 12:34 PM
    #20
    matictundra

    matictundra New Member

    Joined:
    Jul 20, 2017
    Member:
    #8654
    Messages:
    676
    Gender:
    Male
    First Name:
    Franco
    AZ
    Vehicle:
    2017 Red Tundra SR5 4x4 CM
    3"/1.5" Lift (Fox 2.5 DSC all around, JBA UCA's and Toytec Shackles at 1.5") Front and Rear TRD Sway Bars Nitto Ridge Grappler 37x12.5R18 w/ Brz 18x9 +25mm Methods MR701 Wheels AFE Dry Filter with TRD Flow Acc Dirty Deed No Muffler Exhaust Nitro 5.29 Gears RCI Engine, Trany/Trans-Case and Fuel Skid Plates Relocated Rear Diff Breather | Rear Brake Line Extension Jomax ABS Sensor Armor Colored Matched Front Bulge and TRD Pro Grill Assy Modded ADD Stealth Fighter Front Bumper Custom High Clearance Rear Bumper with Modded Tow Receiver Behind Plate and Chopped Rear Fender Custom Bed Stiffeners 2019 TRD PRO LED Headlights w/ Ihacker Harness | BD 40" ARC AMB/WHT DC OnX6 BD 10" Onx6 in the Grill (2X) Rago Low-Profile Ditch and Extended Brkt with Daul BD Squadron Pros - AMB & WHT AMB LED Chase Light (Cargo) | Dual BD Squadron Sports in Rear Bumper Prinsu Roof Rack with a Pair of BD S1 For the Sides and Rear Mictunning C2 Rock Lights, 2 per wheel, and Toyota style switch 2X 55" Quick Light Whips with Toyota style switch Switch Pros SP-9100 with Custom Switch Mount, Custom Engine and Roof Terminal Junction Boxes 12K Lbs Smittybilt Winch with wireless remote and Factor 55 FlatLink E Amp Power Step EVO-One Remote Start Limo Tint (All Around) | De-Badged LED Interior lights with Front / Rear Interior Footwell LED Blue LED Lit Lock/Window Switch Mod AJT Full Chrome Delete Kit w/ 3R3 Painted SHCS Toyota LED Bed Lights Leather Perforated Wrapped Steering Wheel Black TRD Shift Knob ESP Long Box BakFlip MX4 Bed Cover Thinkware Q800Pro Dashcam (Front & Rear) Rago Dashmount w/ Ram Phone Holder
    I have the same setup. I actually have their entire skiddies, trans and fuel.
     
  21. Sep 10, 2019 at 1:11 PM
    #21
    15whtrd

    15whtrd Mr. Blonde

    Joined:
    Sep 20, 2015
    Member:
    #1829
    Messages:
    9,387
    Gender:
    Male
    First Name:
    Sean
    SoCal
    Vehicle:
    White 2015 Tundra DC SR5 TRD 4x4 5.7L, White 2003 Sequoia 2WD
    TRD Pro suspension, +2 Coachbuilder shackles, 2015 TRD Pro headlights, 20% ceramic tinted windows, clear ceramic tinted front windshield, aFe drop in pro s dry air filter, TRD airflow accelerator, TRD oil fill cap, TRD 18 psi radiator cap, BDX Bullydog tuner, Weathertech floor mats front and rear, rear seat fold down mod, DNA hard trifold tonneau cover, Linex with uv protection, TRD rear swaybar, TRD center caps, TRD Pro grille insert with color matching surround and bulge, TRD PRO headlights, aluminum oil filter canister, Real truck tailgate seal, Pop-n-lock tailgate lock actuator, rear diff breather relocate, RCI front skid plate. 275/70 R18 BFG KO2s
    That’s the plan eventually. Hard to do all at once. I let my truck mods nickel and dime me LOL
     
  22. Sep 13, 2019 at 6:07 AM
    #22
    JRTundra

    JRTundra New Member

    Joined:
    Aug 22, 2018
    Member:
    #18457
    Messages:
    153
    Gender:
    Male
    First Name:
    Jeff
    Indiana
    Vehicle:
    2014 SR5 Crewmax 4x4
    What does RCI use as fasteners for the oil access door? Are they a standard size or do they require a special tool? I'm looking to get rid of my factory skid because all of my front bumper tabs have magically disappeared and the damn thing rattles like crazy. Thanks
     
    Last edited: Sep 13, 2019
  23. Sep 13, 2019 at 1:27 PM
    #23
    matictundra

    matictundra New Member

    Joined:
    Jul 20, 2017
    Member:
    #8654
    Messages:
    676
    Gender:
    Male
    First Name:
    Franco
    AZ
    Vehicle:
    2017 Red Tundra SR5 4x4 CM
    3"/1.5" Lift (Fox 2.5 DSC all around, JBA UCA's and Toytec Shackles at 1.5") Front and Rear TRD Sway Bars Nitto Ridge Grappler 37x12.5R18 w/ Brz 18x9 +25mm Methods MR701 Wheels AFE Dry Filter with TRD Flow Acc Dirty Deed No Muffler Exhaust Nitro 5.29 Gears RCI Engine, Trany/Trans-Case and Fuel Skid Plates Relocated Rear Diff Breather | Rear Brake Line Extension Jomax ABS Sensor Armor Colored Matched Front Bulge and TRD Pro Grill Assy Modded ADD Stealth Fighter Front Bumper Custom High Clearance Rear Bumper with Modded Tow Receiver Behind Plate and Chopped Rear Fender Custom Bed Stiffeners 2019 TRD PRO LED Headlights w/ Ihacker Harness | BD 40" ARC AMB/WHT DC OnX6 BD 10" Onx6 in the Grill (2X) Rago Low-Profile Ditch and Extended Brkt with Daul BD Squadron Pros - AMB & WHT AMB LED Chase Light (Cargo) | Dual BD Squadron Sports in Rear Bumper Prinsu Roof Rack with a Pair of BD S1 For the Sides and Rear Mictunning C2 Rock Lights, 2 per wheel, and Toyota style switch 2X 55" Quick Light Whips with Toyota style switch Switch Pros SP-9100 with Custom Switch Mount, Custom Engine and Roof Terminal Junction Boxes 12K Lbs Smittybilt Winch with wireless remote and Factor 55 FlatLink E Amp Power Step EVO-One Remote Start Limo Tint (All Around) | De-Badged LED Interior lights with Front / Rear Interior Footwell LED Blue LED Lit Lock/Window Switch Mod AJT Full Chrome Delete Kit w/ 3R3 Painted SHCS Toyota LED Bed Lights Leather Perforated Wrapped Steering Wheel Black TRD Shift Knob ESP Long Box BakFlip MX4 Bed Cover Thinkware Q800Pro Dashcam (Front & Rear) Rago Dashmount w/ Ram Phone Holder
    I use 5mm metric hex to open the RCI oil filter access hole.
     
    15whtrd and JRTundra like this.
  24. Sep 15, 2019 at 12:35 AM
    #24
    JRTundra

    JRTundra New Member

    Joined:
    Aug 22, 2018
    Member:
    #18457
    Messages:
    153
    Gender:
    Male
    First Name:
    Jeff
    Indiana
    Vehicle:
    2014 SR5 Crewmax 4x4
    Thanks @matictundra. I appreciate the response.
     
  25. Sep 15, 2019 at 4:52 AM
    #25
    JohnLakeman

    JohnLakeman Burning Internet Daylight

    Joined:
    Feb 21, 2019
    Member:
    #26430
    Messages:
    3,008
    Gender:
    Male
    Outside of Weird, TX
    Vehicle:
    2017 MGM DC TSS 4.6L
    TRD Pro grille, 2018 LED Headlights, Undercover Flex bed cover, Neoprene seat covers, Bed/tailgate mats, Power tailgate lock, auto headlights, illuminated key switch
    Yep. An old trick to avoiding cross-threading is to turn the fastener counter-clockwise one turn, or until you hear/feel the thread lead fall into position, before tightening. :thumbsup:
     
  26. Sep 16, 2019 at 11:35 AM
    #26
    matictundra

    matictundra New Member

    Joined:
    Jul 20, 2017
    Member:
    #8654
    Messages:
    676
    Gender:
    Male
    First Name:
    Franco
    AZ
    Vehicle:
    2017 Red Tundra SR5 4x4 CM
    3"/1.5" Lift (Fox 2.5 DSC all around, JBA UCA's and Toytec Shackles at 1.5") Front and Rear TRD Sway Bars Nitto Ridge Grappler 37x12.5R18 w/ Brz 18x9 +25mm Methods MR701 Wheels AFE Dry Filter with TRD Flow Acc Dirty Deed No Muffler Exhaust Nitro 5.29 Gears RCI Engine, Trany/Trans-Case and Fuel Skid Plates Relocated Rear Diff Breather | Rear Brake Line Extension Jomax ABS Sensor Armor Colored Matched Front Bulge and TRD Pro Grill Assy Modded ADD Stealth Fighter Front Bumper Custom High Clearance Rear Bumper with Modded Tow Receiver Behind Plate and Chopped Rear Fender Custom Bed Stiffeners 2019 TRD PRO LED Headlights w/ Ihacker Harness | BD 40" ARC AMB/WHT DC OnX6 BD 10" Onx6 in the Grill (2X) Rago Low-Profile Ditch and Extended Brkt with Daul BD Squadron Pros - AMB & WHT AMB LED Chase Light (Cargo) | Dual BD Squadron Sports in Rear Bumper Prinsu Roof Rack with a Pair of BD S1 For the Sides and Rear Mictunning C2 Rock Lights, 2 per wheel, and Toyota style switch 2X 55" Quick Light Whips with Toyota style switch Switch Pros SP-9100 with Custom Switch Mount, Custom Engine and Roof Terminal Junction Boxes 12K Lbs Smittybilt Winch with wireless remote and Factor 55 FlatLink E Amp Power Step EVO-One Remote Start Limo Tint (All Around) | De-Badged LED Interior lights with Front / Rear Interior Footwell LED Blue LED Lit Lock/Window Switch Mod AJT Full Chrome Delete Kit w/ 3R3 Painted SHCS Toyota LED Bed Lights Leather Perforated Wrapped Steering Wheel Black TRD Shift Knob ESP Long Box BakFlip MX4 Bed Cover Thinkware Q800Pro Dashcam (Front & Rear) Rago Dashmount w/ Ram Phone Holder
    Exactly what I do but no dealer tech does this, lol.
     
  27. Sep 16, 2019 at 12:54 PM
    #27
    JohnLakeman

    JohnLakeman Burning Internet Daylight

    Joined:
    Feb 21, 2019
    Member:
    #26430
    Messages:
    3,008
    Gender:
    Male
    Outside of Weird, TX
    Vehicle:
    2017 MGM DC TSS 4.6L
    TRD Pro grille, 2018 LED Headlights, Undercover Flex bed cover, Neoprene seat covers, Bed/tailgate mats, Power tailgate lock, auto headlights, illuminated key switch
    Nope, very unlikely. The worst are untrained tire techs that place the lug nut on the lug chamfer, and then run it up using full impact gun capacity. Lug is over-torqued at least, stripped-buggered at worst. Think about that while you're getting your next "free" tire rotation. :mad: :rant:
     
  28. Oct 1, 2022 at 11:39 AM
    #28
    Nbab23

    Nbab23 2020 SR5

    Joined:
    Oct 22, 2021
    Member:
    #69676
    Messages:
    449
    Gender:
    Male
    First Name:
    Nathan
    PA
    Vehicle:
    2020 SR5 crewmax
    Stillen CAI, DD 8” exhaust, Toytec Aluma coilovers, Icon leaf springs, SCS SR8 18x9 wheels, Cooper Rugged Trek 275/70/18 A/T Tires, Ecoological bumper shellz and grill surround, AJT interior black out kit, AJT shift knob. TRD pro style grill, VLED aqua blue footwell lights, MESO custom dome and map LED lights, swing case, Rough country bed mat, TRD pro headlights and fog lights, Morimoto XB tail lights and 3rd brake light.
    I know this is an older thread but has anyone found the part number for the screws that go into the retaining clips? First few Toyotacare oil changes resulted in missing clips and screws for me. Thanks.
     
  29. Oct 1, 2022 at 11:47 AM
    #29
    Tundra234

    Tundra234 New Member

    Joined:
    Nov 30, 2018
    Member:
    #22402
    Messages:
    16,057
    Gender:
    Male
    First Name:
    George
    Florida
    Vehicle:
    2020 Tundra DC SR5 Barcelona
    Alot of them
    Nbab23[QUOTED] likes this.
  30. Oct 1, 2022 at 12:56 PM
    #30
    Nbab23

    Nbab23 2020 SR5

    Joined:
    Oct 22, 2021
    Member:
    #69676
    Messages:
    449
    Gender:
    Male
    First Name:
    Nathan
    PA
    Vehicle:
    2020 SR5 crewmax
    Stillen CAI, DD 8” exhaust, Toytec Aluma coilovers, Icon leaf springs, SCS SR8 18x9 wheels, Cooper Rugged Trek 275/70/18 A/T Tires, Ecoological bumper shellz and grill surround, AJT interior black out kit, AJT shift knob. TRD pro style grill, VLED aqua blue footwell lights, MESO custom dome and map LED lights, swing case, Rough country bed mat, TRD pro headlights and fog lights, Morimoto XB tail lights and 3rd brake light.
    Awesome thank you. I kept looking at the bumper diagrams. Wasn't even thinking skid plate.
     

Products Discussed in

To Top