Give me your honest opinion on the Raptor liner look

Righteous!

 

Thanks man

 

Gotcha. The tint is in 3 ounce bottles which equals about 88 milliliters. Raptor says to add 100 milliliters of tint. Did you conmpensate for the difference or just
add the one 3 ounce bottle to each liter of Raptor?

Thanks.

 

Just add the 3 oz bottle that's it,the trick is to use a paint mixing container dump out the bottle of raptor and add your paint then your hardner,and then mix it up dump it back in, it works better this way anyway because it will be to much in the bottle,you never want to have the bottle full it will leak out of the top hole in the gun,half to 3/4 full works the best.any more questions just ask,doing a golf cart and boat the next two weeks,prep is so important so make sure you prep and clean

 

It looks sweet!! How is it holding up? I’m thinking about doing the lift gate and upper area of the bed. Those areas seem to get all the dings and bumps on my truck. I’m on the fence with just using any ole bedliner because I would hate to see it fade and crack up on my truck. What are your thoughts? Thanks.

 

Holding up great,no fading,no cracking,I did a bunch of vehicles already not one problem.

 

That’s good to know. I have been hearing about people having their bedliners crack and peel recently due to the extreme heat.

 

Looks good just needs some new shoes

 

Looks great. I like what you did with the wheels. They look much better than metal finish.

 

Thanks I just used flat black wheel paint

 

Yeah,just had a son so this project is on hold

 

And raptor has uv protection

 

That’s a very important feature. Thanks.

 

I like the color better than just black like you see everywhere. I would love to never have to worry about pinstripes or scratches again

 

Like it

 

I love it to ,soap and a scrub brush your done

 

With what you all sprayed dove gray, how many bottles did you use? I want to get the 8 liter kit on eBay but curious as to how many bottles I’ll use.

I want to have enough to do 2 coats of black on the grill, front and rear bumpers, and mirrors and finally 2 coats of dove gray on the body just as you did. But I’ll do the door handles too.

 

I used 8 on my truck always good to have enough,can't stop and go get more I over estimated I got 4 or 5 leftover of the paint

 

So the 8 liter kit would be enough? How many bottles with dove gray would you say you used? I’m trying to see if the 8 liter kit would be enough or if I should get a few more so I have enough black.

 

Each bottle of tint for one liter of raptor plus your hardner,I used 3 black to do my rest of my stuff,I used 8 liters of dove gray

 

Looks great. What have you done with the interior? could you post a couple of pics of how you transitioned/blended from the raptor to the inside paint? Thanks!

 

Looks like the exact reason I loved south. Nice truck though.

 

I used the same color inside the doors what a f pain in the balls,I used a paint brush and this stuff stinks inside, so don't do it use paint to match

 

Did you take off the Tundra and TRD badges before painting? If so, how did you reattach them? Or did you tape them?

Thanks.

 

After taking a very detailed look at every picture. My verdict is that S@#$ is AWESOME, I LOVE THE LOOK..I got to get it done.

 

I taped them off,was concerned with the texture they would not go back on,made the right choice

 

Thanks man,I get so many people asking about it,I still love it,easy to clean

 

Did you go 70 then realize it was too bumpy then went with 80, or was there a method to your "madness"?

 

No you put a medium coat first then then you finish with second coat with the texture you want.

 

That cement looks great! I remember checking yours out before I sprayed mine with quicksand raptor. Tough choice between the two colors.