Tundra Fox 2.5 coilover height

Fox sells these direct. This is the tool to adjust it’s like 35 bucks

 

Rig4war, beautiful truck!

 

Thanks, I appreciate it.

 

They also come adjusted for the tundra lean out of the box as well. Or at least mine did.

 

Awesome truck right there, very clean! What did you use for the taillight tint?

 

Get the pin punch set from harbor freight and it's the 3/8 one. Works perfectly and it's like $8 for the set

 

Thanks!

I used VHT Nite shades lense spray.

 

I’m running a fresh pair of Fox 2.5 resi 0-3” with 8 threads showing and am 26.5” up in the front. Out of the box 4.5” of lift paired with Camburg moog UCA. Tomorrow I’m planning to reduce the preload 6-7 threads and hopefully drop the front 1”.

 

I set mine at 7 threads on the drivers side and 2 threads on the passenger side. That gave me about 3” lift on the passenger side and about 3 1/8” on the drivers side... I’ll probably adjust the the drivers side down one turn. I’m still working on the rear height and playing with different heights to get the stance I want. I was able to fit 295/70/18 Ridge Grapplers

 

This is my threads and lift a
With the front bumper if it helps

 

This is how my truck currently sits. The back has coach builder shackles with .65” of lift. I will probably raise the rear to 1-1.25” inches of lift. I also added the sparks Toyota color matched bumper caps and Pro Grill.

 

That turned out great! Nice!

 

Thanks!!! Lots of help from guys here!

 

Truck looks great! You know we love pics!

You'll have to add a signature to list your current upgrades.

 

Finally got around to posting the update.
Fox 2.0’s are off and Icons 2.5 Coilovers, rear 2.5 PBR’s, Icon Billet UCA’s and RXT Leaf pack, coachbuilder carrier bearing spacers and old man emu brake line extension kit.

 

Does anyone have a pic of how many threads they have showing on 2.5 non resi? I feel like the front needs to come up just a bit on mine but how much threads (preload) is too much?

 

Take a look at this article and the chart towards the bottom. This will help with your max shock length at ride height:
https://accutuneoffroad.com/oem-front-coilover-shock-setup/

 

Thanks that is very helpful, I will take a measurement when the rain stops these are pics of how it sits currently

 

Does it need to be non res ?

 

Mine are the 0”-2” non res

 

0”-2” fox ifp 2.5 non resi not the best pic since the street is not level

 

Does the 2.5 Resi 2-3" (PN: 880-06-947) give you 2" of lift with collars fully backed off (no preload)?

 

How high did it raise you?

 

I can get 3 inches by cranking it

 

Oh wow, a full extra inch? That's awesome, thank you.

 

If you are actually getting a true 3" of lift with those shocks, you most likely are completely topped out and have zero down travel. I would be curious to know the shock lengths at ride height with 3" of lift.

 

It’s not even half way cranked I got them used from a buddy who got them from accutune, when he first got them they.we’re cranked super high the front of the truck was way up

 

I actually need to raise the rear I had to add air in my air bags just to level it out the front sits way higher then the rear

 

@AccuTune Offroad do
You know what are the measurements from the center hub to the top fender with a 3 inch lift?

 

We don't reference lift height that way, we go off the shock lengths. Take a look at this article which explains a lot of that in detail:

https://accutuneoffroad.com/oem-front-coilover-shock-setup/