2019 tundra TSS SR Foglights

Has anyone successfully installed aftermarket foglights in there 2019 tundras that did not come equipped with them. i have searched and cannot find suitable quality Fog light assy. that
can be installed without a lot of fabrication . I read the thread about one of the members using existing fog light wiring and adding relays and removing steering wheel and changing headlight stalk. I asked my local dealer where i bought the truck about this and they told me they had tried that on 2019 and it would not be successful. They did tell me they could get aftermarket ones installed for 640.00 dollars. Kind of expensive but maybe a good alternative.
I would tackle removing S/wheel and replacing headlight stalk but not sure if it as simple as that. Any suggestions anyone? Did find these but description says they would be replacements for existing foglights https://www.cjponyparts.com/fog-light-clear-with-wiring-kit-pair-toyota-tundra-2014-2018/p/FGLA60/

 

I recommend you to check your truck, most of the time they come prewired for fogs, do your headlights stalk have the fogs switch?

 

No it does not have the stalk switch with fog lights but does have the foglight harness tied up on each side behind bumper.

 

Should be easy just to add a relay or two and swap the headlights stalk

 

My only experience with this is from my Ford Escape. I had to cut the bumper to install factory lights, there were wires already. I had to install a fog switch and relay. The most important thing was programming the computer to let it know there were fogs so the switch would work. I learned to just get them with fogs going forward. Someone with tecstream should be able to check if you need program for them in Tundras.

 

Check this thread out maybe you’ll like those aftermarket fog led fog lights.

https://www.tundras.com/threads/diy-rigid-trd-pro-fog-lights-brackets.37902/

 

I installed Cali raised kit last Thursday on my sr seems to be fairly sturdy plugged into factory harness with adapter also got fog light switch for dash not sure if I’m going that route or install stalk still need to pickup relay

 

Please post your progress on fog light install on your SR TUNDRA. Mainly if you bought a stalk.

 

I have not purchased stalk yet. I have been busy on other projects

 

I just installed Fogs in my 2019 SR DC (it did not come with them from the factory). Easy job, I replaced the headlight stalk, wiper stalk and installed new fogs...see my post on this thread:

https://www.tundras.com/threads/installing-oem-fog-lights-on-2019-tundra-sr.44842/#post-1466081

 

I want to add fog lamps to my 2014 SR. I have the wiring behind the lights in the bumper but I don’t have the switch on my turn signal stalk. I am frankly not interested in changing out the stalk since it looks complicated. I want the fogs on whenever I have my parking lights on (when tail lights are on but not headlights) and when my headlights are on. I found this thread https://www.tundras.com/threads/easy-5-min-anytime-fog-light-relay-mod-diy.20508/

And I think all I have to do is buy the lights/bezels, a fog light relay, and a 15amp fuse. Do I simply have to install the lights, hook up the connectors behind the bumper, install the fog light fuse, bend the relay tab, install the relay, and ground the relay bent tab?

 

I’ve not done the anytime mod, but the stalk upgrade was super easy - since I put a new leather steering wheel on and new wiper stalk it made sense to do all at the same time.