2017 SR5 CrewMax - Pop&Lock, which wires?

Hi all
I finally took my time and put in the P&L mod. However, I could not find an image with the correct wiring for my year/edition.

Anyone out there who can tell me which wires to tap in?

Thank you, B.

 

Passenger side kick panel to the right of your right foot when seated. The directions online are clear and easy to follow. The whole job is easy and takes an hour. Sorry it’s been 4 years since I did this, I don't remember the wires.

 

This is how I had it wired in my 2017.

Blue wire to white with silver mark, green wire to blue with silver mark.

 

This ist not helpful at all...

 

Thank you very much, this is what I was looking for!

 

Here is a video For A 2014 Tundra with the wires shown. It is about 5 minutes long. There are other videos on line as well it this isn’t clear enough. Best of luck. Sorry if my post wasn’t helpful.
https://youtu.be/BPQdfllo-NE

 

Only here to say nice member status

 

Although the wire colors are different on my 2018...the wire's are in the exact same location as the post by @hooter

 

Just confirming 2014 CrewMax same. Green pop&lock to blue/silver tundra and blue pop&lock to white/silver tundra wires.

Also, since every single video and instructions just said "run the wires on thr passenger frame" I have some pictures of what I did since I wasnt sure what they meant. I ran it under the rear seat since there was an easily accessible unused rubber grommet.

Lastly, I put my scraps of noico 80mil to deaden the sound. Worked great.