Icon cdcv coilover with 700lb spring

does anyone have these coilovers with a 700 lb spring for extra weight in the front? Or these with their 600lb spring with bumper and winch in front? They told me they’re not designed for the 700lb spring and I don’t want it to sag/ not handle well

 

Get fox then if they don’t want you to have a 700lb spring. Mine rides great tons of room for adjustments

 

I didn’t even really consider fox. I’m sure some people are running these with extra weight

 

I just installed mine yesterday with the 700lb springs. So far the ride is great but I'm only getting 2" of lift on driver side and 2.5" on passenger side with max preload. I have a call into icon to see what's going on cause sdhq said I should be getting quite a bit more lift than what I'm getting.

 

Thanks plz let me know. I would thought they would give you more lift with 700 lb spring but I know nothing

 

Will do hope to here something tomorrow cause the truck looks off with a 5" height difference from front to back.

 

U got any pics?

 

Fox x2

 

Doesn't fox have issues with rusting?

 

better spray some MAVCOAT on that brand new suspension before winter comes.

 

I ran 700lb springs that were 2" longer just fine on the same coilovers. I had a bumper and winch on that setup. I went with the length so I wouldn't have pre-load.

 

What is the rear lift set at?

 

Go for the 700lb spring if you are adding weight.
Get extended bumpstops too.

 

I could be wrong, but Recently Eibach had issues with their coils, which is probably why you’re not getting the lift expected with the 16/700lb coils on the icons.
There is a thread here on this forum somewhere about it.

 

The rear is at option 2 on the rxt leaf pack.

Yea I was in that thread. I just finally got a weekend off of work to install everything.