What have you done to your 2.5 gen Tundra today?

I like those but I use my stock antenna to gauge if I have enough clearance for parking decks

 

Added the Havoc HS3 nerf bars and OEM blackouts. ended up leaving the 5.7 badge as is as I like the chrome with black lettering better than the full black

Found some TRD wheels on ebay off a 2019 that supposedly only have 25 miles on them, that are coming next week, going to mount the stock 255's back on them and get some life out before probably putting on some of the Deegan 38 AT's

 

How much? Any install guides? Airbag concerns me.

 

Finally had the tint done.

 

I got the paint and plastic adhesion off of Amazon. They’re kinda of expensive so hopefully it holds up. They have a bunch of how to videos on YouTube too.

$30 SEM 39863 Plastic Adhesion Promoter Aerosol - 14.8 oz.

https://www.amazon.com/gp/product/B007VTSRZ8/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

$18 SEM Trim Black Ultra Automotive Spray Paint - 14.5 Ounce Can

https://www.amazon.com/SEM-Black-Ul...sprefix=SEM+ultra+black,automotive,162&sr=1-2

 

Awesome thanks! Did you have to sand the grill before applying the adhesion spray?

 

Changed out the shifter knob today. I like the new one much better.

 

It is amazing how much better it feels versus the stock shifter.

 

[/QUOTE]

Rad textured tailgate there dude! Lol.

 

I got her dirty!!!

 

Installed some spare Chevy anchors onto the bedrail holes. Did this the other day. I'm liking it a lot. Glad I didn't toss it.

 

I went with black for a while and it just took too much away from the rim. Give it a try and see what you think.

 

Where did you purchase those? Are the supplied bolts the correct thread or did you get those separately? I like that better than the bed rails.

 

I got these from Amazon when I still had my Silverado. Dee Zee brand here

$24 Dee Zee DZ97903 GM Cargo Anchor Tie Downs

https://www.amazon.com/gp/product/B001JL42L2/ however there's bunch of other brands now too that are cheaper.

I am not using the bolts that came with. I went to the hardware store and picked up some M6x1.0. Just make sure it's long enough to pass through, the one's I bought were like 1 1/2" long or so but I don't mind. just takes more wrenching.

 

Added the Wizgear magnetic phone holder.

 

Can you tell the difference

 

That looks great!

 

God those are beautiful wheels! I like the silver, but either one will look BA...

 

Bye Bye chrome!
Pro grill & Bumper Shellz covers

 

oh i can't wait for my bumper covers to come in!! that looks awesome!

 

More gooder

 

Same idea, different brand - location is great, keeps the phone cooled by the ac while sitting in traffic

 

Washed truck then decided to decon, clay, and polish tailgate and applied dallas paint correction "shield" ceramic. I have had it and been dying to test it out. 1 coat down and 1 to go. Easy to apply and work with, affordable too, supposedly has filling capabilities as well as 18+ months of protection. Needs another coat in a couple hours then 24 hours to fully cure.

 

Sonax coating and then took it to the dump.

 

Took apart the front grille again to fix the lower mount light bar.

The company was kind enough to send replacement end caps and mounting bolts... Too bad it was for a different light bar.. but a little ingenuity and it's back in.

 

This was long over due

 

What kind of bed cap/ rack is that? Looks cool. Any pics?

 

AT habitat

 

Holy shit that's freaking sweet!! I'd love something like that. Must cost a small fortune

 

Mild 2/1 lift, still has a little rake

Removed chrome steps


I like some chrome but the steps are just too much
Most of the Tundras around here are blacked out so with the gray wheels and chrome mine is a bit different