Having a brain fart (yes ANOTHER offset question)

I'm confusing myself. Set me straight:

Stock TRD 18" wheel = +60mm offset, correct?

If I currently have 1.25" spacers, that effectively means my stock TRD 18" wheels have an "offset" of +28 1/4mm. Correct?

So if I were to remove the spacers, and go with a wheel that has a +12mm offset, my new wheels would stick out FURTHER than my current wheels by 16 1/4mm, or 0.64" MORE than they do right now.

Do I have all that right?

PS: What do the stock TRD 18" wheels weigh?

 

That sounds right to me.

 

Give or take a mm yes. 25.6 mm per inch. Not sure on stock wheel weight.

Edit: if I did my math right, .63975905512 inches difference.

 

Looks correct....not sure if the offset is different on the 18” factory TRD compared to the 20” tss but I believe the offset on my factory wheels was ~+.52

 

What's cool is we have a Keysight Reference DMM with 8.5 digits of resolution. It could measure 0.63975905 VDC.....heh....heh....

 

Sweet! The voices were right! (this time).

Thanks ya'll

 

Sounds right to me.

 

When I said factory.....I meant the TSS wheels that came on my truck from the dealership, my bad

 

Too much math in here....