50statesoverland - 2018 SR5 Cement CM Overland Build

Adding a couple aftermarket head unit pics
AVIC 8400 NEX
********* speakers
********* 5 channel amp
Tech12volts dash speakers w/ center

 

Loving your build. Is your max modular rack 46" or 58"? I am trying to decided which one I want to go with.

 

Thank you!
46”
58” takes up the entire bed. I wanted a little room to adjust as needed.

 

A few of the Method MR312 rims:

 

You're killin' me!

 

What Tundra bed inserts are those? They look really good on the cement. The rest of the build is awesome too.

 

Bed inserts?
Do you mean the black lettering inserts on tailgate? They are OEM. Let me know if this is what you are asking. Sorry.

 

Yes thanks. I couldn't remember what they were called. I didn't know they had those OEM

 

How are you liking the MR312? Do you have any rubbing in the front? I’m running 295/70r18 and looking at this wheel (+18) and curious if I’m gonna run into excessive rubbing. Currently have a 1-1/4” spacer in the front and rub slightly in reverse on full lock but it’s not an issue for me. I think the added .25” might give me some issues.

 

I have less rubbing with this wheel than the +18mm SCS I was running before! I have wheel spacers as well, 295/70/17. You’ll have the same or less with this wheel!

 

Right on. I was looking at +25 in the NV which would only change offset by a 1/10” on paper but method only has a Few options in the +25 offset.

Thanks for the input!

 

@itsdchz , how’s the rear expansion pack holding up. Has the rear maintained it’s lift? I looking strongly at Stage 3 and adding the UCAs or possibly just getting the Stage 5, but I’ve read some people saying the expansion pack goes flat in a relatively short amount of time.

 

I haven’t noticed any flatness, but I use sumo springs which helps the stress from towing. I have 8000 miles of towing on the truck, and 30,000 on the springs... seems to hold up well.

 

Never have seen your truck around yet but would love to see it and we only one hour away from each other some day I might see you on the road

 

We are doing a run in the 23rd to buck rock in sequoia.... you should come out

 

Wifes bday June 23rd

 

Thanks for the invite though

 

love this build...keep up the amazing work

 

Thank you! I need to post updated pics!

 

With your current suspension setup and the size of the tires, dis it provide enough ground clearance for you? I keep going back and forth over 33 or 35 inch tires but might stick with a 33 cuz there’s narrow tires in that size, no skinny tires on a size 35.

 

Love it, looks awesome!

 

About the only skinny 35 I know of is 285/75R18.

 

These are 35x12.5x17

the ground clearance and clearance from suspension has a great amount of tolerance.
No rubbing on suspension or Cab Mounts since being chopped long ago.

Thank you for the props!

 

Yup I was gonna go with that size @zcarpenter92, good looking truck @itsdchz

 

Thank ｙｏｕ！

 

BUMP this awesome build!
Just wondering if you are still running the 1.25 Spidertrax with the current setup? If so I'm assuming you're running them front and rear?
Were they needed to clear your setup or were they added more for stance?

 

Running them front and rear up until a little while ago. Removed the fronts for better clearance with the 35” tires and offset of the 17” rims. It touches the inside fender, even with a lot of trimming. Less aggressive tires wouldn’t, but the MT’s do. Thank you for the kind words!

 

I absolutely LOVE this build!! You nailed it man.

 

Which model Voodoo rack did you put on your truck? There seems to be alot to choose and I like how yours fits. Thanks