Ultimate OEM Toyota Parts Thread for 2nd gens (2007-21)

Check the first post in this thread

 

FORUM20 gets 20% off shipping.

 

https://parts.toyotaofcoolsprings.com/oem-parts/toyota-drip-molding-crewmax-755510c060

Promo code is in the OP.

 

That is correct. Pay no mind to the diagram images.

 

@Roman is this the right part to the master window control assembly in the diver-side door?

84820-0C020

For a 2008 Tundra CM.

IDEALLY, I’d like to get only the plastic housing for this switch assembly since all the switches work fine but the unit is falling down into the door due to a busted plastic screw hole on the housing.

@Yzed608 @xando do you know what this rubber piece actually does? I’ve been without my passenger side since a car wash took it, and the AZ heat is slowly liquified the driver side. I can’t actually see its purpose...

 

@Roman can you confirm if this is the correct part number for the Inferno door edge guards for a crewmax?
PT936-34171-04

and is this also for all 4 doors?

 

To me it just looks like it stops water from being able to rest against the top of the windshield seal.

 

I don't have any for the climate control knobs. The vents on the dash can be ordered in black.

https://parts.toyotaofcoolsprings.com/oem-parts/toyota-air-outlet-vent-556800c050c0

 

That is the correct part number. Unfortunately, the only way to get the housing is to order the whole switch.

 

Yep, that is the right part number. It does include all four doors.

 

@Roman,
I noticed the info about not able to use a 2019 TRD pro grille on a 2018+ Tundra is gone from the original post. Has something changed where the pro grille is compatible with a 2018+ Tundra?

 

Forgot to use the promo code, so enjoy the extra $1.80 ! Maybe you can retire early

 

The 2019 Pro grille has always been compatible. Using the older model Pro grille on the new models with TSS is where the difficulty lies. There's nowhere to mount the sensor on the older model grilles.

 

Next time I buy a beer, I'm going to think "silverhack bought me a third of this beer. Here's to silverhack.", and raise you a toast.

 

@Roman, cavalry blue grille still on back order?

 

As of right now, there is showing to be one at my distribution center and two others available elsewhere in the country. So, it is not technically on back order now but once one is ordered it will be after that.

 

@Roman, just placed the order along with a few other “goodies”... quick, call your distribution center!!!

Please double check the grille and hood bulge ordered part numbers are correct for Cavalry Blue!

BTW, order number 42624 - Angel Berrios

Thanks!

 

Looks like I missed this one, any way to get a ping as they become available?

 

Honestly, I would go ahead and place an order. That ensures you will get one of the first ones once they become available, even before they start becoming readily available.

 

No more Inferno door handles or mirrors correct?

 

No more door handles, unless you have them painted locally. The mirror caps are still available.

 

They aren't showing on the website do I need to call you directly for the mirror caps?

 

They're in the mirror cap section found here:

https://parts.toyotaofcoolsprings.com/oem-parts/toyota-mirror-assembly-879400c470

Just select Inferno from the drop down menu.

 

Thanks for all that info; I am little lost in that much info. If I wanted to get rid of the chrome parts of my 2018 TRD Off Road grill and swap them out to magnetic gray, what all do I need to order?

Do I just need this? 53101-06340-B1 or 53101-0C040-B1 or am I missing something?

 

Awesome got it!! Thanks

 

You would have to choose which MGM grille you want to go with, grab the hood bulge in MGM, and that's it.

 

Looking for replacement felt inserts (gray) for passenger front and passenger rear inside door handles (2010 crew max)...thanks

 

Here's a link. It's the same one for front and rear.

https://parts.toyotaofcoolsprings.com/oem-parts/toyota-armrest-cover-742210c020