2019 Cement Crewmax SR5, Need Help

I am going to be getting the TRD Grille/Lights/Rigid Fogs, front and back caps.

Wanting to level, best option. Do not want it much higher just level, recommendations?

Looking for a good tonneau, recommendations?

What else guys???

 

Welcome from CO.

I think folks get the Bilstein's 6100's and set it at the top level. Folks that have done this will chime in soon.

 

Hiya and welcome from SoCalif!!!

 

Welcome from SoCal.

Tonneau, Bakflip is good. Had one on my '14 and loved it.

As for leveling, the Bilstein suggestion is good. @Toytec Lifts can help with ideas and prices. IMO, avoid spacer lift/leveling kit unless you plan to have a pavement princess.

Congrats on a great looking truck!

 

Nice looking truck! Here's the details on my lift. Kept roughly a 1" rake just to make sure all good with the sensors, and to limit the sag when loaded up:

https://www.tundras.com/threads/bigjs-2019-tundra-sbn-build.39796/#post-1030794

 

Budget isn't a concern. I will have the truck for 12-15 years. I don't want to raise it just level.

 

Welcome to the party! We have a ton of different options to fit the needs of every style driver and budget!

Whats your end goal for the truck?

 

Welcome from Texas

 

I’ll be that guy. You need to go back and read the rules. Learn to use the search button. Then understand every person is going to tell you something different. All of your topics have been discussed tons of times on here. You will find pages and pages of what you are looking for

 

Hello and welcome from slc!

 

Welcome from SoCal!

 

Welcome from Ohio.

 

Welcome from San Diego. I’ll 2nd what was mentioned above. Start with what you plan to do with your truck and then work backwards. There are plenty of options out there that will level the truck but range from the cheap end like Bilsteins 5100s up to OEM Kings. Both will accomplish the same look but will serve completely different purposes. If you plan to keep the truck for a long time, I’d start your search with Bilstein 6112s and/or any of the Toytec offerings and then work up from there depending on how much beating on the truck you plan on doing.

Once you figure it out, be sure to let me know... I still haven’t decided myself.

 

Welcome from NE Ohio. I have the extang hard trifold (and l love it). Cement/White are pretty much tied for second best color IMO. Great looking truck sir.

As far as a level goes, there's plenty of good info on this forum that I've seen already while browsing/dreaming. Best of luck.

 

Oh yea and I have the Toyota cover. I like it a lot. I also got a discount on it when I bought the truck otherwise I probably would have went the Backflip route.

 

Welcome from NC. I have Bilstein 6112s on my truck. I have mine set at 1.3 inch lift. Most on here will go to 1.9 inch setting which should get you almost level or 2.5 inch setting which will get you level or maybe even nose high. Depends on the truck. They are all different. 6112s ride good to me and they are not too terribly expensive. They fit the bill for what I needed. Put some 5100s on the rear and you are still less than $1000 with a good ride.

 

Welcome. If you plan on keeping the truck that long, I would not advice the spacer. Bilstein is really a great way to go and will level things out nicely. Agree with the Toytec lifts advice as well.

 

If budget isn't a concern I love my Elkas can level the front easy and the ride is so much better then stock. Toytec can definitely hook u up!

 

Welcome from South Carolina

 

Welcome to the party!!

 

Definitely interested to hear more about the Elka’s. They look great on paper but are so new for Tundras that there isn’t a lot of feedback out there. Have any pictures of your set-up?

 

I don’t have to many pics but can take more if you like. I have the front and rear set up 1” blocks on the rear.

 

Welcome! I like the diamondback hd tonneau.

 

You're in the right place.

 

Welcome from Ohio