6112/5100 question

Hello all,
I have been reading and reading on here and am going with the above set up. My question is on the fronts if I run at the top setting, what bump stops do I need? Is there one for the shock or is it the CB ones that extend the factory bumps? Question for the rear is with the 5100’s and the ToyTec shackle on the highest setting will I need a shock extension? If so where can I find those?
Thank you all

 

Call @Coachbuilder1 https://shop-coachbuilder.myshopify.com/
He will answer all of your questions.

 

From what I understand, you will not need a shock extension with the Toytec shackle and the 5100s. That's what I'm also installing in the next day or two.

 

Thanks guys!

 

They arrived. I will install tomorrow.

 

nice, post pics when done..

 

the 6112's come with spacers for the bumpstops, they look like thick washers, simply unscrew stock bumpstop, slap washer on re install.

 

The spacer washers are provided with the front shocks. Nothing is needed in the rear.

6112 needs it in the top 2 settings out of 4 options. 5100 top 2 out of 3 options

 

Thanks guys. My frame is getting replaced this week and all my parts will be in tomorrow. The dealership will be installing everything since the truck will be disassembled anyway. Hopefully I will have the truck back by the end of the week.

 

HAHAHA!!! Is that what those four Large washers sitting on my workbench are for? I just went and installed two per side and added some blue loctite as well.

 

I think a lot of those are thrown away as "WTF are these for?"