**MASSIVE GROUP BUY (FOG LIGHTS, LIGHT BARS, AND MORE)** eledobleu **CLOSED**

Hello everyone! As many of you know I recently lost my son in 2018. Because of this I am no longer doing retrofits. However, because I am a dealer for The Retrofit Source, I can still offer my fellow Tundra members great discounts on a lot of products. After receiving so many emails and messages, I have decided to hold group buys on specific products of up to 20% off, and also continue the 10% off Tundras.com member discount on all products on the website. The website has been updated with some of Morimoto’s newest products and is still being added with new products (retrofitwholesale.com). All orders will come with TRS’s standard warranty.


First, I would like to start with the Morimoto XB LED Fog Lights for 07-13 and 14-19 Tundra models.


10+ MEMBERS NEEDED FOR ALL GROUP BUY's


20% + FREE Shipping to Continental United States


HOW TO PURCHASE:

Click the following links below to go directly to the purchase page on RetrofitWholesale.com. During checkout, use coupon code "groupbuy20" Coupon is restricted to 1 item per order. So if you want to order more than 1, you must do separate transactions.

If you don't see an email confirmation after purchase, please check your Spam Folder.

END DATE:

TO GIVE PEOPLE PLENTY OF TIME TO PURCHASE, THIS GROUP BUY WILL LAST UNTIL SUNDAY @ MIDNIGHT 3/11/2019 Eastern Time. Please note fog lights will not begin shipping until after 10 orders have been placed.

PURCHASE LINKS:

XB FOGS TYPE T (14-19) TOYOTA (OVAL): MORIMOTO XB LED FOG LIGHTS - Retrofit Wholesale Note: (2018- 2019 Sport and Platinum models come standard with LED fog lights. Only order this if you have SR, SR5 and Limited models)

XB FOGS TYPE T2 (07-13) TOYOTA (ROUND): MORIMOTO XB LED FOG LIGHTS - Retrofit Wholesale

RULES FOR ALL GROUPBUYS:
1. You must be a forum member.
2. During checkout, you must include your forum username (SEE EXAMPLE). Any orders without verified forum usernames will be canceled and refunded before or after group buy has closed

WARRANTY:

Fog lights comes with a 10 year warranty!
Please read Warranty Details: Warranty - Retrofit Wholesale

SPECS

• Light Source: 3x Philips Luxeon-T
• LED Optics: Kuria-2 Projector Fog Lens
• Intensity: 2400 Lumens (1200 per fog light)
• Kelvin Rating: 5500K (pure white)

• Input Socket: Sealed H11 Male
• Weather Rated: IP67 Waterproof
• Lens Material: High Impact Polycarb (UV-Resistant)
• Shell / Heat Sink: Powder Coated Cast Aluminum

PICTURES:













XB FOG LIGHT INSTALL GUIDE

XB FOGS ARE DIRECT Plug N Play

Gen 2
1. You need to go through the wheel well liner. Once you remove it, you will have access to the fogs.
2. Disconnect the fog lights connector.

3. Theres 1 Plastic retainer that holds the fog light in place. Use a flat head screw driver to unlock it. Remove the fog light by pushing foward and out.

4. Get your new XB fogs. The fog lights are NOT L/R Oriented.

5. Check the connectors polar pattern. Its reversed compared to standard connectors. Insert the wires into the blank connector noting the proper orientation of the Positive and Negative wires. (Be careful as once you lock it in the connector, its extremely difficult to remove).

6. Slide the XB fogs in its place and use the plastic retainer to lock it in place.

7. Connect the Fog Lights to OEM connector.

Gen 3
1. You need to go through the wheel well liner. Once you remove it, you will have access to the fogs.

3. Disconnect the fog lights connector.

2. There are two slots and 1 screw that holds the stock in place. Remove the scew and slide the stock fog light.
3. Get your new XB fogs. The fog lights are L/R Oriented. Look on the back of the lights to locate the L/R letters to know which side. R= Passenger, L=Driver.

4. Check the connectors polar pattern. Its reversed compared to standard connectors. Insert the wires into the blank connector noting the proper orientaion of the Positive and Negative wires. (Be careful as once you lock it in the connector, its extremely difficult to remove).

5. Slide the XB fogs in its place and either use the new screw that came with the fogs or re-use the old. Its a tighter fit as the tabs on the XB are thicker. Tighten the screw down.

6. Connect the Fog Lights to OEM connector.

AIMING


Since everyone has different heights on their truck, I cant give you a specific way to aim them. Best way is before removing your old fogs, drive back 10-15ft from a wall or ground and use tape to mark where your lights are.

The XB fogs are projector base LED's so the light will be more focused. Start by aiming them to the stock levels. Drive around without headlights on (parking lights off) so you can see where the spread is.

Spread should be about 4-10 ft in front of your truck depending on your headlights.

For those with retrofits, you want the XB fogs to end right at the beginning for your main HID or LED projector beam spread.

For those with stock halogen reflectors (with or without hid or led upgrades in reflector housings), you want the beam to end towards the middle of the main headlights beam spread.

Raise and lower to get your optimum desired height.

Hope this helps guys

 

Profile LED Light Bars


Now available are Profile’s LED Light Bars. These Light Bars are all RGB and can be controlled using your phone if you purchase the optional XB Bluetooth Controller.


15% GROUP BUY 10+ Members.

Coupon Code: “rgbar15”

ORDER PAGE (https://retrofitwholesale.com/product/profile-performance-rgbar-8/)

SPECS:

· LIGHT BAR: 1x Profile RGBAR in sizes of 8″, 9.5″, 20″, 26″, 32″ and 42″

· BRACKETS: 2x Powdercoated L Mounts

· HARDWARE: Hex mounting screws w/ key

· WIRING: DT06 Male 12V +/- Input

· WARRANTY: 3 Years



PICTURES:

 

*** MORE PRODUCTS WILL BE ADDED TO THIS THREAD INCLUDING; LED WHEEL LIGHTING, TAIL LIGHTS, LED BULBS and MORE....!***

 

Posting in here for the morimoto headlights when available. Already have the OEM LEDs and dig them, but if these are that much better then I want a pair.

 

In for updates. Is the LED lights comparable to what I would pay in a basic retrofit?

OAN, my deepest condolences for the loss of your child. Prayers up.

 

I think the Morimoto XB headlights will be sick.

 

Thank you!

From my understanding, the light output will be on par with Morimoto Projector retrofits. Also these headlight swill have roughly a 5 year warranty. Updates will be posted about the Headlights as I receive them.

 

I would be interested in these!

 

Them damned "soon to be released" Morimoto headlights.

Just take every damned cent that I have, damnit.

 

Condolences to you and your family. I lost my son a few years back not easy !!!
Can you get any discount on the OEM sequoia leds retro sells ?

 

sorry for your loss and +1 on the OEM 2018 Sequoia for us gen 2 Tundras unless TRS has plans to release gen 2 headlights like the 14+

 

Thank you! Although I wish this on no one, Its a relief to know someone else shares my pain .

To answer your question, unfortunately not at the moment but there's a high change Morimoto is also working on an XB Headlight assembly for Gen 2 Tundras and Sequoia models. If any news arises I will let everyone know!

 

that would be awesome. so many of us gen 2 with no LEDs

 

My condolences to you guys and family.

 

It's been a while but its good to see you back after your family's tragedy. I hope that things will be on track this time around and there are no hard feelings after everything that went down when you left last year. Best of luck to you in the future here.

 

Thanks buddy I really appreciate it. No heart feelings at all. I'm just glad to be able to help my fellow Tundra owners again.

 

Condolences to both of your families.

 

Thank you!

 

XB Headlights have been moved to a seperate thread.

 

Thank you !!!!

 

Contemplating these Morimoto fogs or the Baja Squadron Rs. I know they are completely different. I do have these Morimotos on my wife's Forester XT Touring and they match the factory HIDs perfectly and have a great beam pattern.

 

i'd be interested but how much brighter are these XB FOGS TYPE T (14-19) compared to the stock ones? Does anyone have any photo comparisons?

 

Are you referring to the stock halogen or stock LED fogs 2018-2019?. If halogen, theres a comparison in the first group buy for this I did in 2017. I will locate it and post it here.

 

Just purchased and installed 4 of the 3x3 cubes.. love them. I may look into this lightbar if I don't go the soundbar route!

 

Good to see you back. I have no idea of the pain you must be going through.

 

Thanks!

 

LED, I have LED setup on the 2018 Sport.

 

The oem led fog lights are good. I would suggest staying with those. The morimoto led fog lights are a better option for people with stock halogen fogs.

 

Thanks..

 

No problem buddy!