2014 Tundra Batmobile

I could send her your way after she is finished with the next in line.

 

You're the man!

 

Had to replace our front entryway flooring before I could finish up a couple of mods to the truck this weekend. I installed the rear diff breather as well as the center console wireless charger. I bought my rear diff kit from https://www.yotashop.com/.

 

Replaced my blue led lights for cool white. I also replaced my single led tailgate light with a OPT7 Rigid three row led light. I would upload a video showing the tailgate light but not able to upload it since its not an allowed extension.

 

What a cool build. Keep having fun with it

 

Finally received my RCI skid plate. Had my two boys help me install it. I also replaced my fog lights with LED bulbs. I installed a custom Batman edition emblem on my center console.

 

It’s been awhile on my build finally got some good weather to make a few upgrades. Thx to @DecalsByDesign for the vinyl work. Genesis wraps did the USA flag tailgate wrap with the Batman vinyl from @DecalsByDesign. Also changed the boot screen image.

 

Installed zone off-road UCA and 17” antenna. Also removed the 5.7 badge

 

I changed up the wireless charger due to the big case on my phone it wasn't charging.

 

It's missing a laser, heat-seeking missile, or maybe a detached hovercraft.

This build is ... unbelievably creative.

 

Thank you sir. I might have to add lasers and a detachable bike

 

This dude is ... Straight OUTTA Gotham.

 

Where/what did you put on the switches covers to make them “Metal”? Are they wrapped or is it s piece of metal of some sort?

 

It is a metal cover. You can get it off Amazon or eBay

 

Got new tires. Hit the end of a curb gutter and punctured my rear wheel. Had 285/55/20 so I went with 33/12.5/20 Firestone mk2. The treads are aggressive. The misses didn't quite appreciate that I had to buy new tires. Up in Colorado Springs for the week so quite a bit aways from home to just leave the spare on

 

I just ordered these yesterday. Aren't they chrome? From your pictures, they look like silver metal and so does your door handle unless it's the camera?

 

Meant to put my question here, sorry.

 

Enjoy the time in the Springs! That's where I live.

Loving your truck. Saw you recently removed the 5.7 badges, but, as of the last pic of your tailgate, you still have the dealership badge on there. Any plans to remove that to clean it up?

 

Ya the ones I have are brushed metal looking. I could not find them when I looked for you. my door handle is stock silver color

 

When I got my tailgate wrap done I removed the dealership badge

 

@fairclothr1 ya I love it here in the springs. Plenty of outdoor activities to do and see. Especially being very dog friendly. I have thought about finding some trails to drive but time has not allowed me to to that with doctors appts for my son.

 

@TundraDude18 I have a future bike project to go with my truck theme

 

You couldn't find them?? But...you're Batman!!...lol...I appreciate you looking but I actually want the chrome ones. When you posted the ones from Amazon, I thought they were the ones you got and they were brushed silver instead of chrome. I thought it might have been a case of false advertising. I have chrome door handles and this is why I want the chrome ones to match. Great looking truck you have there.

 

I know right. Glad you got the ones your were looking for

 

Finally had good weather so I washed and waxed my truck. I also installed led bed lights with button switch. I ran the wires underneath the truck frame inside a wire loom up to the engine bay fuse block. I also removed my side door vinyls. Have new design done by @DecalsByDesign to install another day.

 

I was looking to get a better light bracket than the one I had. So I went with MCM Fab light mounts to go with my 54" light bar I also got a wireless remote for the light bar and tied in the Dutch lights. I used techstream to program new key fob. I have also picked up a new project to work on. I got a 85 Honda Shadow 700 to work on to go with my truck. Now that spring is here can work on more mods.

 

Looks good!!...I like the fuse block. This is what I want to do and been learning about it but cant seem to find the answers Im looking for. I want to make a switch panel with 5 relays, fuse block and terminal block.

1) When you wire the grounds from all relays to the grounds on the fuse block and then you wire the positive lead from the LED light to the terminal block, do still have to wire the ground for the LED light to the chassis or do you just leave the ground hanging since you already have a ground from the relay?

2) If all my LED lights are protected with 3-5 amp fuses, why on earth would you need a 30amp fuse between the battery and switch panel? I read this and just just don't understand why 30amps if the total number of lights I have draw little to nothing. Also what gauge wire from the battery to the switch panel? I read 12 gauge??

Hope you can help me here or anyone else?

Thanks!!

 

1) I had pre-made wiring harnesses that came with my leds that I just ran the positive and negative wires to the fuse block. For ex. My roof led and ditch lights came with a wiring harness that connected all three on one relay. No wires are left hanging or lose. As for the bed leds I just connected the positive and negative wires straight to the fuse block since the leds came with a button switch.

2) I am not sure on the fuse question but I do it just to have safety in mind. I used 12 Guage wire to connect the fuse block to battery

 

Yeah thats how my set of 8” led rectangle lights came, with a harness but the harness is too short and the on/off switch is too small. I got it from Superbrightleds and one thing about them is that their on/off switches are always small. So I have to go the DIY route with wiring and got the same power switch as my other 2 so they all match. I figured while I was at it, redo everything and install a relay panel. Thanks for the information. Really appreciate it and say hello to the Mayor for me Batman..lol!